I have Problem my Canon MP610 Black not printing good. Electrical printhead problems tend to happen very suddenly. Clogged Canon print head Grandad35 posted.

Install the print head Install the print head by following the procedure below. • Turn the printer on. Cara Menginstal Printer Mp287 Tanpa Cd here. • Check that the printer is powered on and open the print head cover.

(The print head / holder will move from the right to the center.) • Unlock the Print Head Lock Lever by squeezing tabs inward. • Raise the Print Head Lock Lever until it stops. Note: Do not touch parts other than the Print Head Lock Lever. • Remove the print head from its package and remove the orange protective cap. Canon Mf6550 Standby Error Codes.

Important: Do not touch the print head nozzles. Note: There may be some transparent or light blue ink on the inside of the bag the print head comes in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on yourself when handling these items. • Insert the print head.

• Lower the Print Head Lock Lever carefully. • Push tabs in left to right order until each clicks into place. • Remove the orange protective cap from the ink tank and discard it. • Insert the ink tanks. Confirm that the red light for each tank is lit and the ink tanks are installed properly. Press down on the Push mark on the ink tank to lock the ink tank into the allocated slot of the print head.

Note: Press the ink tank until a click sound is made. • Make sure the back end (A) of the ink tank is pressed all the way down. Note: The red light may still be lit even if the back end of the tank is not completely installed. • Close the printer cover. Remove / reseat the print head and ink tanks using the following procedure. • Turn the printer on. • Ensure that the printer is on, and then open the Print Head Cover.

The Print Head Holder moves to the center. Note: If the Print Head Cover is left open for more than 10 minutes, the Print Head Holder moves to the right. Close and reopen the Top Cover to return the holder to the center. • Remove the ink tanks. Push the tab and remove the ink tank. Do not touch the print head lock lever (A); remove only the ink tank. Caution: Handle ink tanks carefully to avoid staining clothing or the surrounding area.

Discard empty ink tanks according to the local laws and regulations regarding disposal of consumables. Note: Be sure to replace ink tanks one by one when replacing more than one ink tank. • Unlock the Print Head Lock Lever by squeezing tabs inward. • Raise the Print Head Lock Lever until it stops.

Note: Do not touch parts other than the Print Head Lock Lever. • Carefully lift the print head out of the printer.

Important: Do not touch the print head nozzles. Note: Be careful not to get ink on yourself when handling these items. • Re-insert the print head. • Lower the Print Head Lock Lever carefully. • Push tabs in left to right order until each clicks into place. • Re-insert the ink tanks. Confirm that the red light for each tank is lit and the ink tanks are installed properly.

Press down on the Push mark on the ink tank to lock the ink tank into the allocated slot of the print head. Note: Press the ink tank until a click sound is made.